The 30-36 metre boom offers users more working width while providing optimized use of the capacity and resource benefits of Danfoil ConCorde. The newly developed boom offers, among other things, a new inner link. Reinforcement of the innermost aluminium boom pipe which has been given a wider diameter. Two new heavy boom towers and an additional cylinder on the boom towers providing calmer folding out and in. Its capacity of up to 100 hectares par filling requires fewer filings per spraying job. Offering users optimization of the particular spray job, and valuable time will be saved. Effective penetration in dense crops is provided by the air from the sprayer which will generate turbulence around the plant. Thus allowing for good deposition of the liquid at the top and bottom of the crop, and on the top side and lower side of the leaves. Variable droplet size will enable users to adapt the droplet size to the particular spraying job while providing optimal coverage and low drift. The drop size is controlled by the air pressure alone. The higher the air pressure, the finer the atomizing. Low liquid consumption, 30-40 litres per hectare is considerably lower than that of conventional sprayers. Thus generating savings on chemicals and water – benefiting users as well as the environment. Low own weight gives Danfoil ConCorde a clear edge on conventional sprayers. The low own weight is a must in seasons of very wet soil and in areas of soft peat soil. Heated water for cleaning is standard on the sprayer, providing optimal cleaning of the sprayer, inside and out. One atomizer for all spray jobs as the Eurofoil® atomizer may be used for all spray jobs. The droplet spectrum is controlled by changes in the air pressure only. 10-year warranty on the Eurofoil® atomizer will generate substantial savings for users over a 10-year period. Further, experience shows that, unlike conventional nozzles, our Eurofoil® atomizer will not require cleaning, adjustment, or maintenance. Prepared for injection. Danfoil Injection MultiDose 2000 allows for accurate dosing of the particular chemical. Only clean water is used in the tank, for quick and simple cleaning. Only the necessary volume of chemical will be mixed, thus eliminating the question of any residual volume. Various combinations of chemicals are used during the injection. The injection system is available with up to 6 pumps. |